Euro Gas Ltd working closely with JV Tierney & Co. Consulting Engineers and LMC Engineering recently completed works on the first purpose-built student accommodation complexes in Mill Street, Dublin 8 for students of Trinity College Dublin. Euro Gas Ltd were awarded the order for the supply of mechanical services equipment for a 380 bed student residence on Mill St in Dublin. The development is approximately 15,000m2and consists of six blocks of accommodation with varying number of floors over ground which provides the main horizontal route for M&E services between the blocks.
The buildings comprise Student Residential Accommodation with retail units, management suite, laundry, gym, sports areas and student common areas located at ground level. The main plantroom is located at ground level featuring 2200kW of combined boiler output.
|Mech Contractor||LMC Engineering|
|M/E Consultant||J V Tierney & Co.|
|Architect||Reddy Architecture + Urbanism|
|Main Contractor||BAM Construction|
- Fortes Twin Plate Heat Interface Units for production of LPHW and Domestic Hot Water to each apartment cluster.
- Rendamax high efficiency LPHW boilers into the central plantroom.
- Stainless Steel Flues for the boilers to roof level.
- Boilerhouse Gas Detection System.
Trevor Geraghty from LMC Engineering commented:
“Euro Gas’ products are exceptional, their team technically advised on all aspects of the site installation and they commissioned all units on time and without issue. Due to the high standard of their product and their team we have appointed them to supply and commission the same range of products on a similar 320 bedroom student accommodation which is now close to the commissioning stage and we will use them and their products on any future suitable installations.”